EiToP

Go to content

Products List

DP kit

  • Horus 5002 DP EMI unit
  • Manual, CD, USB Cable, Wiring Diagram
  • Cables Set (Signal, Coil, Buggy & Power)
  • Dual buggy drive 2 3/8”to 5 7/8"
  • Dual buggy drive 2 3/8” to 6 5/8" (special)
  • Coil for DP (matching sizes from 2 3/8’’ up to 6 5/8")
  • Buggy head (sizes from 2 3/8’’ up to 6 5/8")
  • Standard test pipe (sizes from 2 3/8’’ up to 6 5/8")
  • Air jack (normal) set with hose, 4 ext. & 2 tracks
  • Air jack (hi-lo) set with hose & 2 tracks (special)
  • Step-down Transformer 220/110 V (3 KVA)
  • Compressor 200 Lt, 145 psi

BHA Kit

  • BHA Heavy Duty Aluminum Box w 4 lifting points 1.2X1X0.75 m
  • Shooting DC Coil for BHA (10" or 12")
  • AC Yoke, 110V, AC
  • Weight Lift Bar for AC Yoke - 10lb
  • Black Light kit, (with or without) transformer, (110 or 220V)
  • Portable Pressure Sprayer, 3.5 gallon,
  • Centrifuge Tube & Stand
  • Black light Hood
  • UV Meter, Digital
  • Residual Field Indicator 20-0-20
  • Pie Gauge with case
  • Type II Castrol Strips
  • Rubber Powder Applicator - Large
  • Aluminum Sensitivity Test Block
  • Heavy Duty ½” Drill, Milwaukee USA
  • Heavy Duty 7” Angle Grinder, Milwaukee USA
  • Heavy Duty 4 1/2” Angle (Side) Grinder, Milwaukee USA
  • Heavy Duty Die (Straight) Grinder, Milwaukee USA
  • Heavy Duty Blower, Makita Japan
  • 12" I.D. Spring Calipers
  • 12" O.D. Spring Calipers
  • 12" Ruler, (1/8, 1/16, 1/32, 1/64 Increments)
  • 2" or 2 1/4" Inspection Mirror
  • 50’ Tally Tape
  • Drilco Ruler, tool joint identifier
  • 2 Electric Extensions Cords with Plugs
  • 3 ft Brush Extension for Drill
  • Quartz Spot Light Kit

DP Accessories

  • OD Gauges with test block (sizes from 2 3/8" up to 6 5/8")
  • UT Thickness Gauge Kit including probe and 5 Step test Block
  • Pit Depth Gage Knife Base, 0-100
  • Heavy Duty Aluminum Box w 4 lifting points 1*1*1 m
  • Steel Box for Test Pipes w 2 lifting points

DP Spare Parts

  • Thermal chart paper roll
  • Plug & Play EiToP 5002 Mother Board
  • Shoe, for buggy head (sizes from 2 3/8" up to 6 5/8")
  • Spring, for buggy head (sizes from 2 3/8’’ up to 6 5/8")
  • Thermal Printer W Cable
  • Elec. essential spare parts Package
  • 5 Step test Block
  • UT Spare Probe

Re-facing Kit

  • 9" angle grinder with 5/8 shaft for Refacing
  • Sand Disc (6 3/4", 8", 11") (QTY 100)
  • 2 3/8 REG thru 5 H-90 Type I drive tube
  • 4 1/2 IF thru 8 5/8 REG Type IV drive tube
  • Type I Face Plate
  • Type IV Face Plate
  • Mandrel Adapter
  • Drive Tube Cap
  • Drive Tube Bearing Cartridge
  • Pin & Box mandrel (Select Connection)

Consumables

  • Double Spiral Brush for Drill (sizes from 2 3/8" up to 7 5/8")
  • 3" X 1/16" soft or hard cutting wheel
  • 4” Grinding Wheels for Angle grinder
  • Soft Brush Wheel 3" for thread buffing
  • Spare Bulb for Black Light kit
  • Spare Filter for Black Light kit
  • Gray, Red, Black or Yellow Dry Visible Dusting Powder
  • Wet Fluorescent Particles (water or Kerosene)
  • Wet Visible Black Particles - Aerosols, 9X16 oz
  • White Background Contrast Paint - Aerosols, 9X16 oz
  • Red Visible Penetrant (Water Washable or Post Emulsifiable) Aerosols, 9X16 oz
  • Non-chlorinated - Cleaner / Remover - Aerosols, 9X16 oz
  • Non-chlorinated - Developer - Aerosols, 9X16 oz

Casing/Tubing

  • 18" Pipe Wrench, Ridgid
  • 24" Pipe Wrench, Ridgid
  • 36" Pipe Wrench, Ridgid
  • Chain Tong, capacity 3-5", 24" long
  • Drift Tape, 50ft, 3/4 X 1/16"

Thread Gauging

  • Lead gage three point location, 1/2" to 4" capacity
  • Lead Gage setting standard
  • Lead Gage Threaded shank Contact Points
  • Profile Gage, hardened and ground
  • Internal Taper Gage, 4 ½” depth, 1 ½”-9”
  • External Taper Gage, 1” travel, 0” – 10”
  • Taper Gage Gold Coat Contact Points

Other

  • Container Wooden Box for Shipping
  • Caliper measuring OD blade expo Stab. Reamers hole openers diff. sizes from 5.11/15" to 24"
  • Pipe straightening 2 3/8’’ to 6 5/8’’, elec. motor, skid mount
  • Standard Publications (DS-1, API, ASME, …etc)
  • Tool Box with hand tools

Services

  • Calibration Services for Equipment (per man per day)
  • Maintenance Services for Equipment (per man per day)
  • Upgrade old DP unit to computerized system (W/O Laptop)
  • Upgrade old DP unit to thermal chart system
  • Upgrade old 4 function unit to computerized system
  • Upgrade old 4 function unit to thermal chart system

Home Page | About Us | Products | Services | Products List | Contact Us | Site Map

Back to content | Back to main menu